How do you make your car happy?? This is done by listening to the car and through regular maintenance

 How do you make your car happy??
This is done by listening to the car and through regular maintenance


Automotive experts advise using the oil recommended by the company that produces the car, because of the features it contains that make it the best for increasing the lifespan of the car’s engine. Among the most important properties that must be present in the best engine oils are the following:
1- Availability of the highest levels of viscosity even at high temperatures?
2- Availability of a high degree of evaporation.
3- It has a low freezing point.
4- It must not interact with the parts it touches.
5- It must not contain any carbon deposits.
The special oil basin is called (cartier).
Oil pump (pump): The oil usually passes from its sump to a strainer to trap impurities and then passes inside the pump to push it to the oil filter.
Cooling group:
Water pump or pump:
This part works to pull cold water from the bottom of the radiator and then push it back to the cylinder block.
Important notes in the refrigeration cycle:
1 - It is recommended to be careful when lifting the cover of the car’s radiator to check the amount of water in it, as the temperature is very high, especially after running the engine for a long time. Therefore, in such cases, the cover must be moved first - without lifting it - until the water is removed. Pressure inside the radiator, then lift the cap
2- The engine must be started first and then water must be added, in order to prevent the added, relatively cold water from falling to the bottom of the radiator.
3- The water used for cooling must also be completely clean and free of any salts that cause clogging of the pipes of the cooling group.
4- The water for the cooling cycle must be changed at most once every six months, with anti-rust solutions added.
Gasoline group: This group consists of the gasoline tank - the pump - the filter - the carburetor - the carburetor filter.
1- Gasoline tank
This part is located at the end of the car, relatively far from the engine, so that the engine is not exposed to fire if any error occurs - God forbid. It is made of steel, and holds an average of 40 litres.
2 – Gasoline pump:
Or what is called the pump, and it works to withdraw gasoline from the tank and push it back to the feeder.
3- Nutrition:
  This part prepares a mixture of air and gasoline vapor in the required proportions, and pushes this mixture to the charging accumulator in the car
4 – Charging accumulator or so-called (carburetor)
This part receives the air and gasoline mixture and distributes it to the engine cylinders.
5 – Air filter (filter)
This part filters the air before it enters the feeder, and purifies it from impurities and dust. It is an empty cylindrical box.
care of your car doesn't have to be an intimidating task, even for beginners!
Here are some basic car maintenance tips to keep your vehicle running smoothly
and safely:
contains all the specific information you need about your car's maintenance
schedule, fluid capacities, and even troubleshooting tips. Familiarize yourself
with the recommended maintenance intervals for oil changes, tire rotations, and
other important services.
and oil filter: Engine oil lubricates your engine's moving parts,
preventing wear and tear. Regularly changing the oil and filter (as recommended
in your manual) is crucial for engine health. Most cars require oil changes
every 3,000-5,000 miles.

keeps your engine from overheating. Check the coolant level regularly and top
it off if needed using the correct type of coolant specified in your manual.

fluid: This is essential for proper braking function. Check the fluid
level and color regularly. If it's dark or dirty, have it flushed and replaced
by a professional.

washer fluid: This keeps your windshield clean for better visibility. Top
it off with washer fluid when it gets low.

pressure: Properly inflated tires improve fuel efficiency, handling, and
tread life. Check your tire pressure regularly, including the spare, and
inflate them to the recommended pressure listed on a sticker in your driver's
side door jamb.

Tire tread depth: Worn-out tires can be
dangerous, especially in wet weather. Check your tire tread depth using a penny
test. If the tread is level with Lincoln's head, it's time for new tires

Check
all your car's lights, including headlights, taillights, brake lights, and turn
signals, regularly to ensure they're working properly.
worn-out wiper blades to maintain good visibility in rainy weather.
vibrations, or changes in handling. These could be signs of a problem that
needs to be addressed. Don't hesitate to take your car to a mechanic if you
notice anything worrisome.
your car clean, both inside and out. This will help prevent rust and corrosion.
in the shade or covered parking whenever possible to protect your car's paint
and interior from sun damage.
you don't drive your car often, start it and let it run for a few minutes every
week to keep the battery charged and the fluids circulating.
can keep your car running smoothly and safely for years to come! Remember,
regular maintenance is key to avoiding costly repairs down the road.
you have any other questions.

The world of cars is a large sea full of secrets and information, and due to their extreme importance, many car drivers are trying to learn the principles of car maintenance, so that quick action can be taken in the event of exposure to any emergency malfunctions while driving. Therefore, through this report, we will take a quick look at the most important principles and basics of car maintenance. Cars for beginners: Car maintenance is divided into several groups

First: The lubrication group: This group is divided into the engine oil, the oil pump, the filter, and the carburetor (oil sump).

Oil filter (filter): The task of this part is to trap fine impurities that have passed from the filter into the oil passages. It is worth noting that this part, with prolonged use, is subject to clogging, so car experts advise that it should be replaced every 10,000 km.

It consists of the radiator - hoses - water pump - fan - belt, and the belt must be tight. The radiator, or what is called (radiator): This part consists of two water basins (upper and lower), and a group of vertical pipes extends between them, and around them is a group of small blades, which are It is added to increase the area exposed to the air in order to facilitate the transfer of high heat to the outside of the car. Its function begins when the hot water passes from the upper basin to the lower one, so this water is exposed to a current of air, and a heat exchange occurs in which the air absorbs an amount of the heat of the hot water.

 Thermal valve (thermostat): The task of this valve is to control the path of water in the car’s cooling cycle according to its temperature.


if you dont know any thing i will tray to repet again

Taking

Befriend your owner's manual:

This is your car's bible! It

Fluids and Filters:

·        Oil

Car oil and oil filter change

·        Coolant: This

Car coolant

·        Brake

Car brake fluid

·        Windshield

Car windshield washer fluid

Tire care:

·        Tire


Car tire pressure gauge

Car tire tread depth penny test

Lights and wipers:

·        

·        Replace

Listen to your car:

Pay attention to any unusual noises,

Bonus tips:

·        Keep

·        Park

        If

By following these simple tips, you

I hope this helps! Let me know if


Comments